Agfa Anapurna M2540 UV Lamp

$203.34

Agfa V0 171D lamp is for Agfa M1600, M², M2050, M2500 and M2540 FB lamps.

also for Dilli Neo Titan FB2513-06DW, UV-1604D and UVT-1604D-W2V lamps.

Description

Agfa Anapurna M2540 UV Lamp

This Agfa Anapurna M2540 UV Lamp is not only for Anapurna M2540 UV printer but also for the following Agfa uv printers:

  • Agfa Anapurna M1600 uv printer
  • Agfa Anapurna M² uv printer
  • Agfa Anapurna M2050 uv printer
  • Agfa Anapurna M2500 uv printer
  • Agfa Anapurna M2540 FB uv printer

And also for the following Dilli uv printers:

  • Neo Titan FB2513-06DW
  • Neo Titan UV-1604D
  • Neo Titan UVT-1604D-W2V

Agfa Anapurna M2540 UV Lamp is identical to VZero 170D lamp and VZero 171D lamp. It has the following Specifications:

  • Fill: Iron Metal Halide
  • Total Length: 9.84″(250mm)
  • Arc Length: 7″(178mm)
  • Tube Diameter: 0.75″(19mm)
  • Wattage Per Inch: 200 WPI

Agfa Anapurna M2050 UV Lamp

This UV curing lamp is Agfa Anapurna M2050 UV Lamp V0 171D UV Curing Lamp Bulb digital inkjet printers and that is 100% compatible replacement.

  • VZero 171D
  • V171D
  • V0171D
  • 502075

More UV lamp at www.PolarLamp.com

You need to replace your Agfa Anapurna M2540 UV Lamp when your lamp can not cure the inks. Please note: Our compatible lamp end fitting maybe is different from yours and just modify the end fitting to install this lamp.

welcome to see you keep colors instructional web series today we gonna walk you through how to properly change the Agfa Anapurna M2540 UV Lamp on a Lava color large format digital. remember to make sure the printer is turned off. refer to our instructional video on powering off the printer. gather your materials it;s helpful to have a twin screw drivers. in order to have a place for all your materials and keep to have space to perform the lamp replacement. he will need a medium-sized head screwdriver. a small flathead screwdriver up into Agfa Anapurna M2540 UV Lamp. when changing one Agfa Anapurna M2540 UV Lamp it’s necessary to replace the other at the same time. disconnect the two wires that power the fame. and the wire that powers the main you be lame. grab your Philips head screwdriver. and remove the three fronts crews on the lamp housing. lift up the cover and set it aside remove the two screws. on the top back mourners the lamp housing up. lift up the lamp housing and place it gently on the flap. grab your flat head screwdriver. and loosen the wires the lamp out at the terminal. then remove the old UV lamp. from the lamp housing replace the old lamp with the new. you be lame two things to remember our. wine be careful when handling the UV lamps. don’t touch the lamp itself with your fingers to make sure it clicks into place on both sides run the two wires into their connectors on a terminal and secure the set screws with your flat head screwdriver make sure that they’re both secure. in certainly in Powys ing back into its position. secure the two back screws for. replace the cover and then secure the three fronts period. reconnect the fans and UV lamp power supplies. make sure that the two wires for the fans snap into place. and then you repeat the same procedure. to replace the other UV lamp.