Mimaki JV5 Damper

$4.66

Mimaki JV5 Damper

Description

Mimaki JV5 Damper

Mimaki JV5 Damper

Mimaki JV5 Damper
Mimaki JV5 Damper

Price: $3.95 USD

Mimaki JV5 Ink Line Connector Y

Mimaki JV5 Ink Line Connector Y

Connector UV Ink Y
Connector UV Ink Y

Price: $1.95 USD

Mimaki JV5 Damper Connector

Mimaki JV5 Damper

Mimaki JV5 Damper Connector
Mimaki JV5 Damper Connector

Price: $2.49 USD

Ink Line Pump Line Connector

Ink Line Pump Line Connector

Ink Line Pump Line Connector
Ink Line Pump Line Connector

Price: $1.95 USD

Ink Line O ring

Ink Line O ring

O ring for solvent resistance
O ring for solvent resistance

Price: $0.49 USD

Mimaki JV5 Damper

Mimaki Damper.You will need to replace your Mimaki Damper if your head clogged some line after you rule out head issue. Cap Top seal perfect can draw ink from cartridges to head and can delivery ink ink good condition.Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy. Solvent Resistant Cap Top for Mimaki printers JV5. These Mimaki Damper serve 2 purposes.

  1. to prevent the print head from drying out when parked.
  2. to assist in priming/sucking out ink from the head.
  3. If the rubber around your cap top is bent, brittle or dirty, your head can not  suck ink in good condition when the pump is operating – thereby not cleaning your print head properly. The result is misfiring and print head clogging. Inspect your Cap Tops often and replace cap top as necessary.

Mimaki Printer Parts  Damper 11959109Mimaki Printer Parts Damper.You need to change your dampers if Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy.
Our Mimaki Damper are solvent resistant. It is recommend that you change Mimaki  JV5 Damper and O-rings with every head change. Dirty dampers impede the flow of ink and you’ll get frequent drop-outs, missing jets and ink starvation. Eventually, neglected dampers will damage to the printhead because of overheated jets. If you have a problem where the ink constantly gets drained out of the dampers and ink lines – back into the cartridge, you have an air leak. Replacing the O-Ring and screw usually cures this problem. Remember that each printhead uses 2 dampers!

Mimaki CJV30-60. CJV30-100. CJV30-130. CJV30-160. CJV30-60BS. CJV30-100BS. CJV30-130BS. CJV30-160BS. JV33-130. JV33-160. JV33-260. JV33-130BS. JV33-160BS. JV33-260BS. JV5-130S. JV5-160S. JV5-260S. JV5-320S. JV5-320DS. TPC-1000. TS3-1600. TS5-1600AMF. TS500-1800.