HP Belts

$16.89$790.94

HP Belt

Clear selection
SKU: N/A Categories: , ,

Description

HP Belt Scitex 3M Carriage Timing Belt

HP Belt Scitex 3M Carriage Timing Belt

This carriage timing belt is suitable for 3.2 m HP Scitex XLJet / Expedio / Turbojet / GOjet printers. This is the original HP / HP Scitex part (number 610S01011). This belt is 9.1 m long, 28mm wide and has a pitch of 8mm. HP Scitex XL1200 (XLJet 3) / Scitex XL1500 (XLJet +3) / Scitex XLJet 3 Premium / Scitex TJ8550 / Scitex TJ8600 / Scitex Grandjet / Scitex GOjet

HP Belt Scitex XP2700 Carriage Belt

HP Belt Scitex XP2700 Carriage Belt – CW980-00506

This carriage timing belt is suitable for HP Scitex XP2700 printers. This is the original HP / HP Scitex / NUR part (number CW980-00506). This belt is 11,3 meter long and 5 cm wide. HP Scitex XP2100 / Scitex XP2700 / Scitex XP2750, NUR Expedio 3200 / Expedio Inspiration

HP Designjet 9000 Steel belt

HP 9000 Steel Belt

Price: $69.95 USD 

This steel belt (64) is suitable for Seiko Colorpainter 64S and HP Designjet 9000 printers. This is the original Seiko part (number U00101625600). This belt is 468.5(or 525?)cm long and 2.5cm wide.

HP Synchronous Belt

HP Belt 250-S2M-10

Seiko Colorpainter 64S / Colorpainter 100S, HP Designjet 9000 / Designjet 10000, Oce CS6060 / CS6100. This synchronous belt (64) is suitable for Seiko Colorpainter 64S and 100S printers. This is a high quality generic belt that that corresponds to Seiko part number U00103427800 replacing number U00045985400. This synchronous belt is 25cm long and 1cm wide. BELT 250XL 037 [125 THEET 635MM] COMMUNICATION CABLE RS485 DYNAM-2440 PACK W=98 DINTS-WELD F300 HIGH FLEX GRADE BLOWER POWER 10M HIC HOLDER ASSY (CE) HP Scitex TJ Blaze (230V) Printer HP Scitex TJ8300 (230V) Printer HP Scitex TJ8300 (TURBOJET MACHINE 120V) HP Scitex TJ8300 (TURBOJET MACHINE 230V) HP Scitex TJ8300 Blaze (230V) Printer HP Scitex TJ8300 Printer HP Scitex TJ8350 (220V) Printer HP Scitex TJ8500 MACHINE 110V HP Scitex TJ8500 MACHINE 230V HP Scitex TJ8550 (120V) Printer HP Scitex TJ8550 (220V) Printer HP Scitex TJ8600 Printer HP Scitex XP2100 Printer HP Scitex XP2750 Printer INVERTER FREQ 230VAC 0.2KW 1.4A KIT FCO REPLACING U7 FOR F300S VER. 65 KIT FOR BOARD TGIO ROUND CABLE ASSY FOR ENCODER SCANNER FLATBED 4800X9600DPI 24BIT 25W SCREW SHC M4X12 DIN 912 A2 SCREW SHC M6X16 DIN 912 ST.ZINC PL. WASHER SPRING 6 DIN 127B ST.ZINC PL.

HP Belt Scitex 5M Carriage Timing Belt

HP Scitex 5M Carriage Timing Belt

HP Belt This carriage timing belt is suitable for 5m HP Scitex XLJet / Expedio / Turbojet printers. This is the original HP / HP Scitex part (number CW945-01170 replacing 610S01001). This belt is 14.9 m long, 28mm wide and has a pitch of 8mm. HP Scitex XL1200 5M (XLJet 5) / XL1500 5M (XLJet +5) / Scitex XLJet 5 Premium / Scitex Grandjet / Scitex TJ8550 / Scitex TJ8600 / Scitex XP2750 / Scitex XP5100 / Scitex XP5300, HP NUR Expedio 5000 / Expedio Revolution

HP Designjet 8000 Steel belt

HP 8000 Steel Belt

This steel belt is for HP 8000. Width is 25mm and Length is 4800mm

HP Designjet 10000 Steel belt

HP 10000 Steel Belt

This Steel Belt (100) Assy is suitable for Seiko Colorpainter 100S printers. This is the original Seiko part (number U00097291100). This is the belt that moves the carriage on the Colorpainter printer. This belt measures 671cm long and 2.5cm large. Seiko Colorpainter 100S, HP Designjet 10000, Oce CS6100.

HP Synchronous Belt

HP Belt-273-S3M-6

Seiko Colorpainter 64S / Colorpainter 100S, HP Designjet 9000 / Designjet 10000, Oce CS6060 / CS6100. This synchronous belt (64) is suitable for Seiko Colorpainter 64S and 100S printers. This is a high quality generic belt that that corresponds to Seiko part number U00103427800 replacing number U00045985400. This synchronous belt is 25cm long and 1cm wide. BELT 250XL 037 [125 THEET 635MM] COMMUNICATION CABLE RS485 DYNAM-2440 PACK W=98 DINTS-WELD F300 HIGH FLEX GRADE BLOWER POWER 10M HIC HOLDER ASSY (CE) HP Scitex TJ Blaze (230V) Printer HP Scitex TJ8300 (230V) Printer HP Scitex TJ8300 (TURBOJET MACHINE 120V) HP Scitex TJ8300 (TURBOJET MACHINE 230V) HP Scitex TJ8300 Blaze (230V) Printer HP Scitex TJ8300 Printer HP Scitex TJ8350 (220V) Printer HP Scitex TJ8500 MACHINE 110V HP Scitex TJ8500 MACHINE 230V HP Scitex TJ8550 (120V) Printer HP Scitex TJ8550 (220V) Printer HP Scitex TJ8600 Printer HP Scitex XP2100 Printer HP Scitex XP2750 Printer INVERTER FREQ 230VAC 0.2KW 1.4A KIT FCO REPLACING U7 FOR F300S VER. 65 KIT FOR BOARD TGIO ROUND CABLE ASSY FOR ENCODER SCANNER FLATBED 4800X9600DPI 24BIT 25W SCREW SHC M4X12 DIN 912 A2 SCREW SHC M6X16 DIN 912 ST.ZINC PL. WASHER SPRING 6 DIN 127B ST.ZINC PL.

HP synchronous Belt

HP synchronous Belt
How to Install HP synchronous Belt
adjust two screws that controls the tension on left side of the printer, have someone push your carriage from left to right slowly while you turning the screws to see if the Belt is aligned. you can say that its aligned if its not riding up and down. 4.6.2. Replacing the steel BeltCaution :When replacing the steel Belt, be careful not to cut your hands by the Belt.Notes : Do not damage the steel Belt. Remove following covers before replacing the steel Belt.Side cover R: refer to “Removing side cover R”Side cover L: refer to “Removing side cover L”Front cover: refer to “Removing the front cover”Carriage cover: refer to “Removing the carriage cover”Y rail cover: refer to “Removing the Y rail cover”Unlock the head. Notes : Refer to “Head Lock Menu”Move the carriage from the capping position to the left.Rotate the 2 steel HP synchronous Belt adjustment screws counterclockwisely to loosen the steel Belt. 1 = Steel Belt adjustment screws 2 = Steel BeltRemove the 2 screws fixing the steel Belt. 1 = Screws fixing the steel HP synchronous Belt 2 = Steel BeltReplace the steel Belt.Notes : Be careful when handling the steel Belt. The steel Belt may be cut off whenaccreting dust to it or creasing it.Reinstall all parts in the opposite order of the removal procedure.Perform steel HP synchronous Belt tension adjustment according to “Steel Belt tension adjustment”.Notes : Be careful when handling the steel Belt. The steel Belt may be cut off when accreting dust to it or creasing it.The driven pulley shaft is installed one way only. Refer to “Service Parts List/Exploded Views/Configuration Diagrams”, to install it correctly so that the bearing stoppers are on top.After installing the CR slave pulley assembly, move the carriage to the left and right manually to confirm that the steel Belt has been set equally in the center of the CR actuator pulley and the CR slave pulley assembly.
STEEL HP synchronous Belt TENSION ADJUSTMENTThe procedure for adjusting the steel Belt tension is explained below. This section explains the procedure for adjusting steel Belt tension. When removing/installing the steel Belt, adjust its tension.Tools required for work: The following tools are required when adjusting the tension of the steel Belt.Tension gauge: max. 2.0 N (200 g)Steel Belt tension attachment 2: for gauge diameter 2mm (0.08in.) or lessNotes : Refer to “jig and Tool list”. Adjustment ProcedureUse the following procedure to adjust the tension of the steel Belt.Place the tension gauge at the center of the steel Belt. 1 = steel HP synchronous Belt 2 = Tension gauge. Notes : The regulation values for the tension of the steel HP synchronous Belt are shown below. 1. 50 inch, 64 inch specifications: 1.0 N +- 0.1 N (100 g +- 10 g) 2. 87 inch specifications: 0.9 N +- 0.1 N (90 g +- 10 g)If the tension of the steel HP synchronous Belt is not within the range of regulated values, adjust the steel Belt tension screws. 1 = Steel Belt 2 = Steel Belt tension screw 3 = CR slave pulleyMove the CR cursor to the left and right once or twice. Adjust the CR driven pulley until the upper and lower margins are identical.Caution :If the tension is not equivalent across the entire HP synchronous Belt, it could snap during operation.buy HP synchronous steel belt http://lavaprint.com

Additional information

HP Belt

, , , , , , ,