Mimaki Ink Type Change

Description

The Ink Type Change for JV3

  1. SHUT DOWN the JV3
  2. PRESS key “<” “>” AT THE SAME TIME when OPEN THE DEVICE
  3. When the device ready, PRESS KEY “END” 1 time.
  4. Enter into into menu”SYSTME PARAMETRE”
  5. Choose and enter”Ink 1 parametre”.
  6. Look for Item 93 and change the value “3” to “0”
  7. Exit and choose the ink type you want shows on the LCD.
  8. After been choosen, The device will advice you to insert the cartridges. Disregard it and shut down the device directly.
  9. RE-operate 1> …6> but this time change value “0” to “3”.
  10. After set, the device will ask you to insert the cartridges.
  11. insert the proper cartridge.

The Ink Type Change for JV33

How to enter technician mode?

  1. Turn down the front power.
  2. Press “<“, “>” at same time when power on.
  3. Find and Enter menu to “SystemParam” turn to #46 SUPPORT 2 (change the value to “2”)

How to change ink type?

  1. Enter menu ….
  2. Functions
  3. Parameter Function >RUNNING PARAM.
  4. #121, change value “1” to “0” and change “0” to “1”
  5. After set, the device will ask you to choose a ink type when restart on LCD panel.

The Ink Type Change for JV5 is the same as JV33