Description
Mutoh VJ 1604 Capping Station
Mutoh VJ 1604 Capping Station
Mutoh Valuejet 1604 Capping Maintenance
Mutoh Valuejet 1604 Capping Maintenance Station Cap Assembly DF-49686-OMutoh Valuejet 1204 Valuejet 1304 Valuejet 1304W Valuejet 1324 Valuejet 1604 Valuejet 1614 Valuejet 1624Mutoh Valuejet 1604.Capping Maintenance Station Cap Assembly. The warranty will be void if Lavaink label at this Mutoh Valuejet Capping Station was removed!!!
Mutoh Valuejet Capping Station/Cap assembly Maintenance Station Assy should be changed when Cleaning is not performed efficiently because ink is not sucked well. As a result, white or dark lines appear in the printing image.
The capping station seal in good order to protect mutoh print head from being dried.
If the print head and capping station dont seal, you wont pull ink through the system.
A pump actually pulls ink through the head during filling and cleaning cycles by creating a vacuum between the bottom of the head and thecapping station seal. Failure to keep the bottom of the head clean and the seal clean and in good condition will limit the ability to pull ink through the head. This may result in nozzles NOT being cleaned properly.
FAQS:
How do you know your capping station had problem?
If your printhead does not have problem, the most possibility is that capping top or the whole capping station problem.
Because bad capping top can not seal your printhead perfect and cause false fact that your nozzle was clogged.
It’s easy to test this one.
Use syringe to suck out the ink from the tube after ink pump.
Must test two tubes.
If you can easily to suck out ink and that’s not your capping top or capping station problem.
Otherwise, it’s capping top or capping station problem if it’s to hard to suck out the ink from the tube after ink pump.
