Description
This Arizona 350 Vacuum Pump Kit 3010116810 is for Canon Océ Arizona 318 GL,
Arizona 350 GT,
Arizona 350 XT,
Arizona 440 GT,
Arizona 440 XT,
Arizona 460 GT,
Arizona 460 XT,
Arizona 480 GT,
Arizona 480 XT,
Arizona 550 GT,
Arizona 550 XT,
Arizona 640 GT,
Arizona 640 XT,
Arizona 660 GT,
Arizona 660 XT printers.
Specifications:
Voltage: 24V DC
Power: 7W
Flow: 300~400 ml/min
This Vacuum Pump Kit is suitable for Océ Arizona 350 series & Fuji Acuity Advance HD2545 series printers. This is the replacement Océ Arizona 350 series & Fuji Acuity Advance Negative Pressure Pump. It supplies Negative Pressure to the sub ink tank on Océ Arizona 350 series & Fuji Acuity Advance printers.
How to detect if the Arizona 350 Vacuum Pump Kit is working？
Check if the wires were broken, and just reconnect the wires if they are broken. And then just connect two wires from this pump to the power supply with voltage 24V DC. This ink pump life normally is one year to three years. Should replace it if it was damaged.
How to install the Arizona 350 Vacuum Pump Kit？
There are two lines in the ink pump input line and output line. input line is marked ↑ and output line is marked ↓ . You should double check these two lines. Make sure input line is connected to ink in and output line is connected to ink out otherwise you will damage your printer ink line if connecting them wrong. And it will cost you too much time and money if connecting wrong lines.
There are two wires: The one is BLACK WIRE that is should be connected to 24 VDC NEGATIVE – and The other RED WIRE that is should be connected to 24 VDC POSITIVE +.
How to choose the correct ink pump or negative pump for Arizona 350 Vacuum Pump Kit?
Should pick up the correct flow amount pump. The small power pump (3 Watts) for small printer and big power pump ( 7 Watts) for big printer. All negative pressure pump should be 7 watts not 3 watts. It is the key to choose the correct ink pump to keep printer ink line perfect stable.
More information for Ink Pumps Systems
