mimaki 45 degree blade
Mimaki Blade
Price: $5.95 USD
mimaki cutter blade
Price: $49.95 USD
Mimaki Blade
Mimaki Blade for the following printers cutters:
This blade is suitable for Mimaki cutting plotters and printers. These blades have an offset value of 0.5mm. These blades are suitable for cutting fluorescent type vinyl. This is the original Mimaki part number SPB-0007.
Mimaki CF2-0912RC. CF2-0912RT. CF2-0912T. CF2-0912TD. CF2-0912TF. CF2-1215RC. CF2-1215RT. CF2-1215T. CF2-1215TD. CF2-1215TF. CF2-1218RT. CF2-1218T. CF2-1218TD. CF2-1218TF. CF3-1610R1. CF3-1610TF2. CF3-1631R1. CF3-1631TF2. CG-50. CG-60EX. CG-60SR. CG-60SRIII. CG-60st. CG-75FX. CG-75FXII. CG-90SD. CG-100EX. CG-100Lx. CG-100SD. CG-100SRII. CG-100SRIII. CG-130EX. CG-130FX. CG-130FXII. CG-130Lx. CG-130SRIII. CG-160FX. CG-160FXII. CJV30-60. CJV30-60BS. CJV30-100. CJV30-100BS. CJV30-130. CJV30-130BS. CJV30-160. CJV30-160BS. TPC-1000. CF2-0907RC. CF2-0907RT. CF2-0907T. CF2-0907TD. CF2-0907TF. CFS-1313. CFR-1220. CF-0907-2. CF-0912-2. CF-1215-2. CF-1218-2. CG-101. CG-45. CG-61. CG-100SD. CG-90AP. CJV150-107. CJV150-107BS. CJV150-130. CJV150-130BS. CJV150-160. CJV150-160BS. CJV150-75. CJV150-75BS. CJV300-130. CJV300-130BS. CJV300-160. CJV300-160BS.
This original Mimaki cutting blade offers long lasting performance on Mimaki JV2 / JV4 / JV3 printers. This knife cuts the media off on the printer. This is the original Mimaki part number SPA-0064. This blade does not include the blade holder which is part SPA-0107.
Mimaki CG-130FX. CG-130FXII. JV2-90. JV2-130. JV2-180. PV-90. PV-130. JV3-130S. JV3-130SL. JV3-160S. JV3-160SP. JV3-250SP. JV3-75SPII. JV3-130SPII. JV4-130. JV4-160. JV4-180. JV33-130. JV33-160. JV33-260. JV33-130BS. JV33-160BS. JV33-260BS. JV5-130S. JV5-160S. JV5-260S. JV5-320S. JV5-320DS. TS3-1600. TS5-1600AMF. UJV-1101.
Replacing the Cutter Blade
The medium cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).
- The blade is sharp. Be careful not to hurt yourself or anyone else.
- Store the cutter blade in a place that is out of the reach of children. In addition, dispose of used cutter blades according to regional laws and regulations.
- When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade. This will help pick up the cutter blade if it drops.
Replace the cutter blade for cutting
Cutter blades are consumables. When the cutter blade has became blunt, replace the cutter blade with a new one. (SPA-0107)• The blade tip is sharp. Take care to prevent possible personal injury.• Store the cutter blades in a place that is out of the reach of children.Be sure to dispose of the worn-out cutter blades according to the relevant national and local ordinances in which the device is used.• It is recommended to place a sheet of paper under the cutter blade.This will help find the cutter blade even if it drops.STEP1. Execute [CARRIAGE out].page 5.42. Open the front cover.3. Replace the cutter unit that is located along-side the carriage.1. Loosen the screws that fix the cutter unit.2. Remove the cutter unit.3. Put a new cutter unit in place.4. Tighten the screws to fix the new cutter unit.4. Close the front cover, and push [ENTER] key.5. The device enters the LOCAL mode.
Mimaki Blade
Mimaki Blade for the following printers cutters:
This blade is suitable for Mimaki cutting plotters and printers. These blades have an offset value of 0.5mm. These blades are suitable for cutting fluorescent type vinyl. This is the original Mimaki part number SPB-0007.
Mimaki CF2-0912RC. CF2-0912RT. CF2-0912T. CF2-0912TD. CF2-0912TF. CF2-1215RC. CF2-1215RT. CF2-1215T. CF2-1215TD. CF2-1215TF. CF2-1218RT. CF2-1218T. CF2-1218TD. CF2-1218TF. CF3-1610R1. CF3-1610TF2. CF3-1631R1. CF3-1631TF2. CG-50. CG-60EX. CG-60SR. CG-60SRIII. CG-60st. CG-75FX. CG-75FXII. CG-90SD. CG-100EX. CG-100Lx. CG-100SD. CG-100SRII. CG-100SRIII. CG-130EX. CG-130FX. CG-130FXII. CG-130Lx. CG-130SRIII. CG-160FX. CG-160FXII. CJV30-60. CJV30-60BS. CJV30-100. CJV30-100BS. CJV30-130. CJV30-130BS. CJV30-160. CJV30-160BS. TPC-1000. CF2-0907RC. CF2-0907RT. CF2-0907T. CF2-0907TD. CF2-0907TF. CFS-1313. CFR-1220. CF-0907-2. CF-0912-2. CF-1215-2. CF-1218-2. CG-101. CG-45. CG-61. CG-100SD. CG-90AP. CJV150-107. CJV150-107BS. CJV150-130. CJV150-130BS. CJV150-160. CJV150-160BS. CJV150-75. CJV150-75BS. CJV300-130. CJV300-130BS. CJV300-160. CJV300-160BS.
This original Mimaki cutting blade offers long lasting performance on Mimaki JV2 / JV4 / JV3 printers. This knife cuts the media off on the printer. This is the original Mimaki part number SPA-0064. This blade does not include the blade holder which is part SPA-0107.
Mimaki CG-130FX. CG-130FXII. JV2-90. JV2-130. JV2-180. PV-90. PV-130. JV3-130S. JV3-130SL. JV3-160S. JV3-160SP. JV3-250SP. JV3-75SPII. JV3-130SPII. JV4-130. JV4-160. JV4-180. JV33-130. JV33-160. JV33-260. JV33-130BS. JV33-160BS. JV33-260BS. JV5-130S. JV5-160S. JV5-260S. JV5-320S. JV5-320DS. TS3-1600. TS5-1600AMF. UJV-1101.
Replacing the Cutter Blade
The medium cutter blade is consumable. When the cutter blade gets dull, replace it with a new one (SPA-0107).
- The blade is sharp. Be careful not to hurt yourself or anyone else.
- Store the cutter blade in a place that is out of the reach of children. In addition, dispose of used cutter blades according to regional laws and regulations.
- When replacing the cutter blade, it is recommended to place a sheet of paper under the cutter blade. This will help pick up the cutter blade if it drops.
Replace the cutter blade for cutting
Cutter blades are consumables. When the cutter blade has became blunt, replace the cutter blade with a new one. (SPA-0107)• The blade tip is sharp. Take care to prevent possible personal injury.• Store the cutter blades in a place that is out of the reach of children.Be sure to dispose of the worn-out cutter blades according to the relevant national and local ordinances in which the device is used.• It is recommended to place a sheet of paper under the cutter blade.This will help find the cutter blade even if it drops.STEP1. Execute [CARRIAGE out].page 5.42. Open the front cover.3. Replace the cutter unit that is located along-side the carriage.1. Loosen the screws that fix the cutter unit.2. Remove the cutter unit.3. Put a new cutter unit in place.4. Tighten the screws to fix the new cutter unit.4. Close the front cover, and push [ENTER] key.5. The device enters the LOCAL mode.