IKO LWE-20 Bearing Block

Description

IKO LWE-20 Bearing Block

How to install IKO LWE-20 Bearing Block?

Loose or Tight the screws of IKO LWE-20 Block marked yellow to adjust the tension between block and linear rail.

1. Must cleaning your IKO LWE-20 rail perfect because a little durst can cause to fail to install.
2. Put lubricating oil on the IKO LWE-20 Block rail.
3. Must be keep perfect alignment to install the IKO LWE-20 Block. In some case, no enough space to install IKO LWE-20 Block and you need to uninstall the rail to install it.
4. Loose 4 screws to let the IKO LWE-20 Block can go to the rail easily.
5. Put IKO LWE-20 Block gently to the rail and sliding slowly the whole block.
6. Then tight the IKO LWE-20 Block’s screws correct to keep the IKO LWE-20 Block perfect to fit the rail.

This IKO LWE-20 Bearing Block Has the following specifications:

Size: 20

Block Weight: 0.30 kg

Rail Weight: g/100 mm

H: 28 mm

H1: 6 mm

N: 19.5 mm

W2: 59 mm

W3: 49 mm

W4: 5 mm

L1: 66.5 mm

L2: 32 mm

L3: 44 mm

L4: 79 mm

M1: mm

D1: 5.5 mm

H2: 9 mm

H3: 5.5 mm

W: mm