Description
IKO LWH 40 Bearing Block
How to install IKO LWH 40 Bearing Block?
Loose or Tight the screws of IKO LWH 40 Block marked yellow to adjust the tension between block and linear rail.
- Must cleaning your IKO LWH 40 rail perfect because a little durst can cause to fail to install.
- Put lubricating oil on the IKO LWH 40 Block rail.
- Must be keep perfect alignment to install the IKO LWH 40 Block. In some case, no enough space to install IKO LWH 40 Block and you need to uninstall the rail to install it.
- Loose 4 screws to let the IKO LWH 40 Block can go to the rail easily.
- Put IKO LWH 40 Block gently to the rail and sliding slowly the whole block.
- Then tight the IKO LWH 40 Block’s screws correct to keep the IKO LWH 40 Block perfect to fit the rail.
This IKO LWH 40 Bearing Block Has the following specifications:
Size: 40
Block Weight: 0.58 g
Rail Weight: g/100 mm
H: 27 mm
H1: 5 mm
N: 21 mm
W1: 92
W2: 82 mm
W3: 37 mm
W4: 4 mm
L1: 70 mm
L2: 60 mm
L3: mm
L4: mm
L5: 27.5
LW1:
M1: M 5X14 mm
D1: 4.3 mm
H2: 14 mm
H3: 6.5 mm
H5:
W: mm
