IKO LWLF-42-CS Bearing Block

Description

IKO LWLF-42-CS Bearing Block

Wrong Installation will damage the block permanent!!!
Your block is old model without B.
So we send you block with a short rail because the block must be always on the rail.
The block will be damaged if the block come out the rail.
That’s why you have to connect our rail to your rail and then slide the block from our rail to your rail.
Very very important installation!!!

How to install IKO LWLF-42-CS Bearing Block?

Loose or Tight the screws of IKO LWLF-42-CS Block marked yellow to adjust the tension between block and linear rail.

1. Must cleaning your IKO LWLF-42-CS rail perfect because a little durst can cause to fail to install.
2. Put lubricating oil on the IKO LWLF-42-CS Block rail.
3. Must be keep perfect alignment to install the IKO LWLF-42-CS Block. In some case, no enough space to install IKO LWLF-42-CS Block and you need to uninstall the rail to install it.
4. Loose 4 screws to let the IKO LWLF-42-CS Block can go to the rail easily.
5. Put IKO LWLF-42-CS Block gently to the rail and sliding slowly the whole block.
6. Then tight the IKO LWLF-42-CS Block’s screws correct to keep the IKO LWLF-42-CS Block perfect to fit the rail.

This IKO LWLF-42-CS Bearing Block Has the following specifications:

Size: 42

Block Weight: 140.00 g

Rail Weight: 300.00 g/100 mm

H: 16 mm

H1: 3 mm

N: 9 mm

W2: 60 mm

W3: 45 mm

W4: 7.5 mm

L1: 55 mm

L2: 20 mm

L3: 39.5 mm

L4: mm

M1: M4X4.5 mm

H2: mm

H3: mm

W: 42 mm