Description
This Rho Ink Pump is for Durst Rho 1000 Corrugated,
Rho 1012,
Rho 1030,
Rho 160,
Rho 160R,
Rho 161 TS,
Rho 162 TS,
Rho 205/16,
Rho 205/8,
Rho 312R,
Rho 315R,
Rho 320R,
Rho 350R-16,
Rho 350R-8,
Rho 351R,
Rho 500R,
Rho 512R,
Rho 600 Basic,
Rho 600 Pictor,
Rho 600 Rapid,
Rho 700,
Rho 700 HS,
Rho 750 HS,
Rho 750 Presto,
Rho 800 HS,
Rho 800 Presto,
Rho 900,
Rho P10 200,
Rho P10 250,
Rho P10 320R,
Rho SP 60 printers.
Specifications:
Voltage: 24V DC
Power: 7W
Flow: 300~400 ml/min
This Rho Ink Pump is suitable for Rho printers. This is the replacement Rho Ink Pump.
How to detect if the Rho Ink Pump is working？
Check if the wires were broken, and just reconnect the wires if they are broken. And then just connect two wires from this pump to the power supply with voltage 24V DC. This ink pump life normally is one year to three years. Should replace it if it was damaged.
How to install the Rho Ink Pump？
There are two lines in the ink pump input line and output line. input line is marked ↑ and output line is marked ↓ . You should double check these two lines. Make sure input line is connected to ink in and output line is connected to ink out otherwise you will damage your printer ink line if connecting them wrong. And it will cost you too much time and money if connecting wrong lines.
There are two wires: The one is BLACK WIRE that is should be connected to 24 VDC NEGATIVE – and The other RED WIRE that is should be connected to 24 VDC POSITIVE +.
How to choose the correct ink pump or negative pump for Rho Ink Pump?
Should pick up the correct flow amount pump. The small power pump (3 Watts) for small printer and big power pump ( 7 Watts) for big printer. All negative pressure pump should be 7 watts not 3 watts. It is the key to choose the correct ink pump to keep printer ink line perfect stable.
More information for Ink Pumps Systems
