Roland Cleaning Kit SP 300 540 is for Roland Solvent Printer SP 300 and SP 540. Regular maintenance required this cleaning kit.
- 4 generic small DAMPERS for DX4 print head
- 2 generic black silicone WIPERS
- 2 Cap tops generic for DX4 heads
- 20 lint-free cleaning SWABS
- One lint-free cleaning Paper
- One bottle 5 Oz (150 ml) of solvent CLEANING LIQUID
- One SYRINGE 60 ml
- One Soft Feet CLEAR TUBING 2*4
- 10 O-RINGS for damper
Why you need Roland Cleaning Kit SP 300 540?
This Roland Cleaning Kit SP 300 540 is for ink line and print head maintaining. There are too many parts you should take care and repair and keep them in good condition. However, ink line maintaining is the most challenge job for all printer maintaining. The first thing is that you should keep ink line seal perfectly. Therefore, you will need to use syringe that is in Roland Cleaning Kit SP 300 540 to test ink line if it was seal perfect. Especially, you should focus to check all joints in the ink line. Such as O ring that is inside the damper, cap top, manifold etc. Of course, and also damper.
The most import thing is that you can use syringe to suck out after cap top, your ink line is fine and seal perfect if you can suck out ink. Otherwise it proved your ink line is loos somewhere. Check damper, cap top and all ink joints.
All of work, you can use Roland Cleaning Kit SP 300 540 like syringe to check if ink line somewhere is loose and leaking. However, the best solution for ink line is the less joints and the better. Our solution is that connecting tubing to damper directly without any joints and so this solution eliminate the leaking possibility for ink line. Please refer ink line maintaining at maintaining ink line
Print head maintain
There are two kinds of ink system. The first one is positive air pressure ink system, this system is consumable standard machine because it does not require too many equipment. But this system has one defect is that it can not control ink line perfect condition. Such as ink will dropping during printing or air bubble go to ink line, all of these will fail your printing job and it will increase your printing cost. You will need Roland Cleaning Kit SP 300 540’s lint-free paper to wiper ink and keep print head surface perfect. Your printing will fail if there is ink dropping at the surface of print head.
Furthermore, you also will take care Roland Cleaning Kit SP 300 540’s wiper. Wiper is keep the surface of print head clean, and that’s why you have to change wiper if it was dirty. And also you will need to use lint-free paper to clean the print head surface manually if automatically wiper cleaning doe snot work.
Roland Cleaning Kit SP 300 540 cleaning liquid syringe damper wiper.
Roland Cleaning Kit SP 300 540 5(150ml) oz cleaning liquid syringe generic damper wiper cap top oring lint-free cleaning swab lint-free paper.