Description
Roland Encoder Strip SP-300
Roland Encoder Strip
Price: $29.95 USD
This Roland Encoder Strip is for Roland Printers.
Roland Encoder Strip 540
Price: $29.95 USD
This Roland Encoder Strip is for Roland 540 Printers. Roland CJ 500,Roland CJ 540,Roland CJ 545,Roland FJ 50,Roland FJ 52,Roland FJ 500,Roland FJ 540,Roland RS 540,Roland SJ 500,Roland SJ 540,Roland SP 540,Roland SP 540v,Roland SP 540i,Roland VersaUV LEC 540,Roland VP540,Roland VP540i,Roland VS 540,Roland VSi 540,Roland XC 540,Roland XJ 540.
Roland Encoder Strip 740
Price: $31.95 USD
This Roland Encoder Strip is for Roland 740 Printers. Roland FJ 740,Roland FJ 740K,Roland FP 740,Roland SJ 740,Roland SJ 745,Roland SJ 745EX,Roland XJ 740, Roland AJ740.
Roland Encoder Sensor
Price: $39.95 USD[wp_cart_button name = “Roland Encoder Sensor” price=”39.95″]
This Roland Encoder Sensor is for Roland Printers.
Roland Encoder Strip 640
Price: $31.95 USD
This Roland Encoder Strip is for Roland 640 Printers. Roland RE 640,Roland RS 640,Roland SJ 600,Roland SJ 645,Roland SJ 645EX,Roland VersaUV LEJ640,Roland VS 640,Roland VSi 640,Roland XC 640,Roland XF 640,Roland XJ 640.
Roland Encoder Strip 1000
Price: $37.95 USD
This Roland Encoder Strip is for Roland 1000 Printers. Roland SJ 1000,Roland SJ 1045,Roland SJ 1045EX, Roland AJ1000.
Roland Linear Encoder Strip
How to clean Roland Linear Encoder Strip? You should change your Roland Linear Encoder if your printer can not print a Straight line perfectly, like Line dislocation or deflection. You will need Isopropyl Alcohol, Cleaning Swabs and Paper Towels. Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak up any excess liquid. Wipe the exposed area of the Roland Linear Encoder gently in one direction, do not try to scrub the strip or bend it. Repeat the cleaning for the back of the Roland Linear Encoder. Put the machine into Cleaning Mode under the Maintenance Sub-Menu. You will now be asked to remove the maintenance cover on the left side of the printer. After the Head Carriage moves to the left side of the printer, continue to clean the area of the Roland Linear Encoder that is now exposed over the docking area. Once the Roland Linear Encoder has been cleaned, perform a Limit Initialization to reset the Head Carriage. All printer manufacturers use optical Roland Linear Encoders in inkjet printers to tell the print head carrier how for it has moved and also when it return to home position. If you get a bad printer jam hat blocks the carrier this Roland Linear Encoder can get disconnected and then the printer can not print anything. We are about to show you how to repair the strip if it is damaged and reinstall it so the printer can function again. This guide uses the Roland Printer as an example but the steps are the same for any printer that uses these Roland Linear Encoders. The first thing to do is check the strip for damage. Check both ends and make sure the plastic is not torn. The ends should have an opening about 1/4 inch from the end as seen here. If your Roland Linear Encoder is torn you can usually repair it with packing tape. Wrap the tape around the end several times and the use a small knife to cut the tape where the original hole was as seen below. Then cut the tape off the strip around the side and end. Now its time to reinstall the strip. The Roland Linear Encoder attaches to retainer brackets and both sides of the printer and is threaded through the print head carrier in the middle. You will need the carrier to be in the middle of the printer. To get it there you will need to power up the printer and open the cover like you were going to change the print heads. Power up the printer and the print heads should start to move to the side. When they get about the center of the printer you will need to pull the power plug so they stop moving. Connect one end of the Roland Linear Encoder as seen here. Now thread the Roland Linear Encoder through the carrier as seen here. The outside opening is about 1/2 inch but the slot the encoder goes in is only about 1/16in so be patient. Then connect the other end of the Roland Linear Encoder, the left hard side is spring metal to tension the strip and keep it tight. Now if you reapply the power to the printer the carrier should move freely and move back to the right side. Close the printer cover and try a test print to see if it work. If you still get a carrier jam then the strip did not get inserted correctly through the carrier. Just disconnect it and try again. UV Flatbed Printer info at www.LavaPrint.com
Roland Linear Encoder Strip
Roland SC 500 Roland SC 540 Roland SC 545 Roland SC 600 Roland CJ 400 Roland CJ 500 Roland CJ 540 Roland CJ 545 Roland FJ 40 Roland FJ 50 Roland FJ 52 Roland FJ 500 Roland FJ 540 Roland FJ 740 Roland FJ 740K. Roland FP 740 Roland RE 640 Roland RS 540 Roland RS 640 Roland SJ 500 Roland SJ 540 Roland SJ 600 Roland SJ 645 Roland SJ 645EX Roland SJ 740 Roland SJ 745 Roland SJ 745EX. Roland SJ 1000 Roland SJ 1045 Roland SJ 1045EX Roland SP 300 Roland SP 300v Roland SP 300i Roland SP 540 Roland SP 540v Roland SP 540i Roland VersaStudio BN20 Roland VersaUV LEC 300 Roland VersaUV LEC 540 Roland VersaUV LEF 12. Roland VersaUV LEF 20 Roland VersaUV LEJ640 Roland VP300 Roland VP300i Roland VP300v Roland VP540 Roland VP540i Roland VS 420 Roland VS 540 Roland VS 640 Roland VSi 300 Roland VSi 540 Roland VSi 640 Roland XC 540 Roland XC 640 Roland XF 640 Roland XJ 540 Roland XJ 640 Roland XJ 740 Roalnd AJ 740 Roland AJ1000.
Roland Linear Encoder Strip
Roland Encoder Strip SC CJ FJ SJ540 SP RS VP XJ AJ1000 Roland Encoder Strip Roland XC540 SJ640 XJ740 VS420 SP300 FJ40|50|52 SC 500|545|600 CJ 400 SJ645|645EX|740|745|745EX SJ1000 1045
