Roland AJ 1000 Parts
Roland AJ 1000 Parts
56
Yes
Detail
Detail
None
1
lavaink
/Inks-Parts/wp-admin/admin-ajax.php
Roland AJ 1000 Parts
Roland AJ 1000 Parts CR Belt Encoder Strip Encoder Sensor Tube Head Cable Data Cable Ink Pump Rail Block Fan Scan Motor Transistor
Detail
Roland AJ 1000 Parts
Roland AJ 1000 Parts
Roland AJ-1000 Damper 6085393800
$4.95
Roland AJ-1000 Limit Sensor 15099115
$17.95
Roland AJ-1000 IF Network Board
$599.95
Roland AJ-1000 Head Board
$199.95
Roland AJ-1000 Carriage Board
$299.95
Roland AJ-1000 Carriage Belt
$99.95
Roland AJ-1000 Super Heating System
$599.95
Roland SJ 1000 Transistor A1746
$11.95
Roland SJ 1000 Transistor C4131
$11.95
Roland SJ 1000 Upgraded Pump Tube
$7.95
Roland AJ-1000 Refillable Empty Cartridge
$11.95
Roland AJ-1000 Cleaning Kit
$19.95
Roland AJ-1000 Cleaning Liquid 1000ml
$59.95
Roland AJ-1000 Main Board
$1799.95
Roland AJ-1000 Media Clamp 21765122
$9.95
Roland AJ-1000 Power Board
$499.95
Roland AJ-1000 Head Cable 23475206
$3.95
Roland AJ-1000 Long Data Cable 3650
$19.95
Roland AJ-1000 Ink Pump Upgraded
$54.95
Roland AJ-1000 Ink Pump Tygon Tubing
$69.95
Roland AJ-1000 Ink Pump Motor 22435106
$29.95
Roland AJ-1000 Rail-BlockItem_Number: SSR15XW1GGE
$69.95
Roland AJ-1000 Encoder Strip 1000000892
$99.95
Roland AJ-1000 Encoder Sensor 6700909050
$39.95
Roland AJ-1000 Wiper 11379105
$1.95
Roland AJ-1000 Scan Motor 7811909010
$399.95
Roland AJ-1000 Vacuum Fan Assembly 21715110
$49.95
Roland AJ-1000 Fan 1000000012Manufacturer: 广泰电机有限公司0512-63327378Phone: 15162520182
$19.95
Roland AJ-1000 45 DEGREE CARBIDE BLADES
$4.95
Cleaning
Syringe Suck Air Bubble 60 ML
$4.95
Clean Lint-Free Swab 50 PCS
$19.95
Lint-Free Paper
$0.95
Lint-Free Swab Small Size 100 PCS
$4.95
Cleaning Lint-Free Swab 1 PCS
$0.95
Connector
male Female connector for tube OD 9mm/0.35 inch
Connector 4p15
$9.95
Connector UV Ink Tube Fitting Cover
$0.95
Connector UV Ink Tube Female Fitting I Shape
$0.95
Connector UV Ink Tube Male Fitting I Shape
$0.95
Connector UV Ink Tube Fitting L Shape
$0.95
Connector UV Ink Tube Fitting Y Shape
$0.95
Connector UV Ink Tube Fitting T Shape
$0.95
Male Connector OD 9mm Water Cooling System
$19.95
Female Connector OD 9mm Water Cooling System
$19.95
Connector Ink Line Screw ORing
$1.95
O Ring
O Ring for damper uv ink tank reservoir
O Ring for Damper
$0.19
O Ring UV Ink Reservoir Tank
$9.95
Power Supply
Power Supply DC 45V 30V 24V 18V 15V 12V 10A 5V for all printers
Power Supply 5V 10A
$39.95
Power Supply 12V 10A
$39.95
Power Supply 15V 10A
$49.95
Power Supply 18V 10A
$59.95
Power Supply 24V 10A
$79.95
Sale
$89.95$69.95
Sale
$99.95$79.95
Power Supply 48v 10a
$119.95
Spring
Spring Extension Spring Compression Spring.
Encoder Strip Holder Spring All Printers
$29.95
Extension Spring Mutoh Mimaki Roland
$9.95
Compression Spring Mutoh Valuejet Capping Station
$19.95
Throttle Valve
Throttle Valve for Mutoh Toucan Ospery Vutek Gandi Gerber Agfa Infinity UV Printers ink line or negative pressure system. This Throttle Valve will control the uv printer negative air pressure output volume first.
Negative Pressure Throttle Valve
$39.95
Tube
Tube Ink Line tubing Ink pUmp Tubing Hard tube Soft tube
Tube Soft Tygon Ink Pump 2ID 4OD
$19.95
Tube Soft Tygon 1ID 3OD 5M
$9.95
Tube Soft Negative Pressure 4ID 6OD
$1.95
Tube Hard UV Ink 4ID 6OD
$0.95
Tube Soft UV Ink 3ID 6OD
$4.95
Tube Soft 2ID 3 OD
$1.95
Tube Hard 25ID 35OD
$0.95
Tube Hard 2ID 3OD
$0.95
Tube Soft 2ID 4 OD
$1.95
Roland AJ 1000 Parts
Roland AJ 1000 Parts
Roland AJ-1000 Damper 6085393800
$4.95
Roland AJ-1000 Damper 6085393800 Replacement Thread outside diameter: 5.52 mm Inside diameter: 2.7 mm Tubing that fits: 2.7 x 1.5 mm nipple: 1.85mm
Roland AJ-1000 Limit Sensor 15099115
$17.95
Roland AJ-1000 Limit Sensor 15099115
Roland AJ-1000 IF Network Board
$599.95
Roland AJ-1000 IF Network Board
Roland AJ-1000 Head Board
$199.95
Roland AJ-1000 Head Board
Roland AJ-1000 Carriage Board
$299.95
Roland AJ-1000 Carriage Board
Roland AJ-1000 Carriage Belt
$99.95
Roland AJ-1000 Carriage Belt
Roland AJ-1000 Super Heating System
$599.95
Weight: 30 kg/66 lb. When using an unwinding / winding system in combination with slow drying media, applying a lot of ink and/or when printing at high speed, Lavaink Super Powerful dryer will immediately dry your printed media before it is being rolled up. Lavaink Super Powerful dryer will dry the output uniformly across the entire width, without air circulation. Ink will dry faster without losing colour gamut, improving your overall productivity.
Lavaink Super Powerful dryer is available in all kinds of large format printers. The system consists of a stand with casters onto which a heating element is mounted. Brackets secure the distance between the heater and the media. For high-speed production printers, mounting of a second heater onto the stand is made possible.
Roland SJ 1000 Transistor A1746
$11.95
Roland SJ 1000 Transistor A1746
Roland SJ 1000 Transistor C4131
$11.95
Roland SJ 1000 Transistor C4131
Roland SJ 1000 Upgraded Pump Tube
$7.95
Roland SJ 1000 Upgraded Pump Tube
Roland AJ-1000 Refillable Empty Cartridge
$11.95
Roland AJ-1000 Refillable Empty Cartridge
Roland AJ-1000 Cleaning Kit
$19.95
Roland AJ-1000 Cleaning Kit one syringe with tubing and damper. It is good for you to maintain your ink line.
Roland AJ-1000 Cleaning Liquid 1000ml
$59.95
Roland AJ-1000 Cleaning Liquid 1000ml
Roland AJ-1000 Main Board
$1799.95
Roland AJ-1000 Main Board
Roland AJ-1000 Media Clamp 21765122
$9.95
Roland AJ-1000 Media Clamp 21765122
Roland AJ-1000 Power Board
$499.95
Roland AJ-1000 Power Board
Roland AJ-1000 Head Cable 23475206
$3.95
Roland AJ-1000 Head Cable 23475206. they’re 360mm/14″ long. if Mutoh valuejet 1604 head cables get dirty, bent or stripped, you will get printheads which will misfire or finish off altogether – so you’ll need one expensive repair. You hear this all the time – cables that short out the printhead or worse, cause injury to the expensive Head Board or Carriage Board. Official Mimaki documents say that the lifetime of cables is between 5-10 insert/removal cycles. we all know that you simply will get a lot of life if you’re careful in handling these however the actual fact is that the fragile foil leads get broken over time from every removal cycle. If you notice ANY injury (bent instrumentality, dirty leads, even the slightest nick to the cable), amendment out the cable at once. It’s less expensive to switch cables than to wear down a broken head board or printhead!
Roland AJ-1000 Long Data Cable 3650
$19.95
Roland AJ-1000 Long Data Cable. they’re 3650mm/143″ long. if Mutoh valuejet 1604 head cables get dirty, bent or stripped, you will get printheads which will misfire or finish off altogether – so you’ll need one expensive repair. You hear this all the time – cables that short out the printhead or worse, cause injury to the expensive Head Board or Carriage Board. Official Mimaki documents say that the lifetime of cables is between 5-10 insert/removal cycles. we all know that you simply will get a lot of life if you’re careful in handling these however the actual fact is that the fragile foil leads get broken over time from every removal cycle. If you notice ANY injury (bent instrumentality, dirty leads, even the slightest nick to the cable), amendment out the cable at once. It’s less expensive to switch cables than to wear down a broken head board or printhead!
Roland AJ-1000 Ink Pump Upgraded
$54.95
Roland AJ-1000 Ink Pump Upgraded
Roland AJ-1000 Ink Pump Tygon Tubing
$69.95
Roland AJ-1000 Ink Pump Tygon Tubing
Roland AJ-1000 Ink Pump Motor 22435106
$29.95
Roland AJ-1000 Ink Pump Motor 22435106. Thi sroland pump motor is compatible to the following printers: Roland AJ-1000. AJ-740. CJ-540. FJ-540. FLJ-300. FP-740. MDX-540A. SC540. SC-545EX. SJ-1000. SJ-1045EX. SJ-540. SJ-640. SJ-645EX. SJ-740. SJ-745EX. SP-300. SP-300V. SP-540V. XC-540. XJ-640. XJ-740. ZAT-540.
.
Roland AJ-1000 Rail-Block
$69.95
Roland AJ-1000 Rail-Block
Roland AJ-1000 Encoder Strip 1000000892
$99.95
Roland AJ-1000 Encoder Strip is used for encoder sensor to position the printhead and so if encoder strip is dirty and encoder sensor can not read encoder strip position correctly. And printing will be Offset. That’s why when your printing has offset line and you will definately need to replace Mutoh Valuejet 1604 Encoder Strip. Also you can use alcohol to clean encoder strip at one way, but if there is phsyic damage at encoder strip and it will be gabage and useless. How to clean Printer Encoder Strip? You will need Isopropyl Alcohol, Cleaning Swabs and Paper Towels. Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak up any excess liquid. Wipe the exposed area of the Epson Printer Encoder Strip strip gently in one direction, do not try to scrub the strip or bend it. Repeat the cleaning for the back of the Epson Printer Encoder Strip strip. Put the machine into Cleaning Mode under the Maintenance Sub-Menu. You will now be asked to remove the maintenance cover on the left side of the printer. After the Head Carriage moves to the left side of the printer, continue to clean the area of the Epson Printer Encoder Strip strip that is now exposed over the docking area. Once the Epson Printer Encoder Strip strip has been cleaned, perform a Limit Initialization to reset the Head Carriage. see detail at https://lavaink.com/encoder/how-to-replace-encoder-sensor/
Roland AJ-1000 Encoder Sensor 6700909050
$39.95
Roland AJ-1000 Encoder Sensor DF-48986 is used to read the encoder strip position and reply to printer to control printhead movement. If your printer gives warning encoder error, and you should check the encoder strip if it was the range within encoder sensor. How to Replace Encoder Sensor
How to Replace Encoder Sensor
There are four or five cables at all printer or machine Encoder Sensor. These four cables must be connected to printer head board correctly.
Encoder Sensor Gnd Ground Cable ⇄ must be connected to printer head board Ground Line. Most of head board Ground Line is located at the one end.
Encoder Sensor Vcc Power Cable ⇄ must be connected to printer head board Power Line. Power is DC 5V. Most of head board Power Line is located at the other end. But you should double check Power Line to make sure. Otherwise the RED LIGHT at the encoder sensor cannot be ON.
Even wrong connection can not burn your head board because this power line is just DC 5 V. That’s why you can test your cable connection is correct.
Encoder Sensor chA Direction Cable ⇄ must be connected to printer head board A Line. This line controls printer moving direction A (Right or forward). It’s OK if you connect chA and chB wrong first time, and just switch chA with chB.
Encoder Sensor chB Direction Cable ⇄ must be connected to printer head board B Line. This line controls printer moving direction B (Left or backward). detail at https://lavaink.com/encoder/how-to-replace-encoder-sensor/
Roland AJ-1000 Wiper 11379105
$1.95
Roland AJ-1000 Wiper 11379105. Solvent Resistant Wipers for DX4 printheads – for roland printers. once your wipers square measure dirty or slightly distorted, it is time to switch them. Waste Ink and paper mud accumulate on the wipers. If you do not examine and alter them typically, you will get clogged printheads furthermore as gook arbitrarily depositing onto your prints. These square measure low price things and straightforward to vary. it’d be foolish to not perform this required maintenance at regular intervals. we tend to advocate dynamic them each 6-12 months
Roland AJ-1000 Scan Motor 7811909010
$399.95
Roland AJ-1000 Scan Motor 7811909010
Roland AJ-1000 Vacuum Fan Assembly 21715110
$49.95
Roland AJ-1000 Printer Fan
Size: 125 x 125 x 30 mm
This roland printer FJ SJ SP VS fan is for all roland printers: Roland SC 500. Roland SC 540. Roland SC 545. Roland SC 600.Roland CJ 400.Roland CJ 500.Roland CJ 540.Roland CJ 545.Roland FJ 40.Roland FJ 50.Roland FJ 52.Roland FJ 500.Roland FJ 540.Roland FJ 740.Roland FJ 740K.Roland FP 740.Roland RE 640.Roland RS 540.Roland RS 640.Roland SJ 500.Roland FJ-540.Roland SJ 600.Roland SJ 1000.Roland SJ 1000EX.Roland SJ 740.Roland SJ 745.Roland SJ 745EX.Roland SJ 1000.Roland SJ 1045.Roland SJ 1045EX.roland printer fan.Roland SP 300.Roland SP 300v.Roland SP 300i.Roland SP 540.Roland SP 540v.Roland SP 540i.Roland VersaStudio BN20.Roland VersaUV LEC 300.Roland VersaUV LEC 540.Roland VersaUV LEF 12.Roland VersaUV LEF 20.Roland VersaUV LEJ640.Roland VP300.Roland VP300i.Roland VP300v.Roland VP540.Roland VP540i.Roland VS 420.Roland VS 540.Roland VS 640.Roland VSi 300.Roland VSi 540.Roland VSi 640.Roland XC 540.Roland XC 640.Roland XF 640.Roland XJ 540.Roland XJ 640.Roland XJ 740.Roalnd AJ 740. Roland AJ1000.roland printer fan
More detail at https://lavaink.com/roland-printer-fan/
Roland AJ-1000 Fan 1000000012
$19.95
Roland AJ-1000 Printer Fan
Specifications : 40X40X20
Voltage : 24V
Current : 0.06A
This roland printer FJ SJ SP VS fan is for all roland printers: Roland AJ-1000. AJ-1000I. AJ-740. AJ-740I. CJ-540. EGX-360. FJ-540. FP-740. LEC-300. LEC-300A. MDX-540. MDX-540A. MDX-540S. RS-540. RS-640. SC-540. SC-545EX. SJ-1000. SJ-1045EX. SJ-540. SJ-640. SJ-645EX. SJ-740. SJ-745EX. VP-300. VP-300I. VP-540. VP-540I. XC-540. XC-540MT. XJ-640. XJ-740.
More detail at https://lavaink.com/roland-printer-fan/
Manufacturer: 广泰电机有限公司0512-63327378Phone: 15162520182
Roland AJ-1000 45 DEGREE CARBIDE BLADES
$4.95
This roland sc 545 45 degree carbide blades is for the following Roland Printers: BN-20 CJ-540 CM-12 CM-24 CM-300 CM-400 CM-500 CX-24 CX-300 CX-400 CX-500 FJ-500 FJ-540 FJ-600 FP-740 GX-24 GX-300 GX-400 GX-500 GX-640 LEC-300 LEC-300A LEC-330 LEF-12 LEF-20 LEJ-640 LEJ-640F PNC-1000a PNC-1050 PNC-1100 PNC-1200 PNC-1210 PNC-1410 PNC-1410k PNC-1510 PNC-1510hs PNC-1600 PNC-1610 PNC-1610s PNC-1800 PNC-1850 PNC-1860 PNC-1900 PNC-1910 PNC-2100 PNC-2100a PNC-2200 PNC-2200a PNC-2300 PNC-2300a PNC-2500 PNC-2501 PNC-2550 PNC-2700 PNC-2700E PNC-2701 PNC-300 PNC-3000 PNC-300g PNC-3100 PNC-3101 PNC-3101g PNC-3200 PNC-500 PNC-5000 PNC-900 PNC-910 PNC-950 PNC-960 RA-640 RE-640 RS-540 RS-640 Roland SC-500 SC-540 SC-545EX SJ-1045EX SJ-540 SJ-645EX SJ-740 SJ-745EX SP-300 SP-300V SP-300i SP-540 SP-540V SP-540i VP-300 VP-300i VP-540 VP-540i VS-300 VS-300i VS-420 VS-540 VS-540i VS-640 VS-640i XC-540 XC-540MT XF-640 XJ-540 XJ-640 XJ-740 XR-640 . REPLACING THE CUTTING BLADE Read following data on once and the way to interchange the cutting blade.
(1) Replacement time: Replace the cutting blade beneath the subsequent conditions.
a. Media can not be cut cleanly The message “media Cut Error” seems on the operation panel if a media
cutting error happens.
Paper Cut Error
Heaters Cut&Feed User1* Cutter Chg.
Cleaning LeverUp xxxm
b. once the cut edge has scuffing
Follow the steps below to interchange the cutting blade.
Step one: If the printer is turned on, confirm of the subsequent Printing or alternative operations aren’t
performed. confirm that the show on the operation panel shows the conventional standing. The MEDIA SET
lightweight on the operation panel explodes.
Step two: setup Menu at the operation panel and show the cutting blade replacement menu on the operation
panel.(Refer to ‘Cutter amendment menu’) * Cutter Chg. *No affirmative ← F2
Step three :Select “Yes” by pressing the key [F2] at the operation panel. The printer is ready for cutting
blade replacement. The carriage moves to the cutting blade position for replacement. Then message should be
displayed at the operation panel like the following.
Notes
•If you probably did one in every of the items mentioned in step three, the printer doesn’t replace the
cutting blade and returns to the setup menu.
•Then Press the [CANCEL] key on the operation panel.
•Then Select “NO” then press the [F1] key on the operation panel.
Cleaning
Syringe Suck Air Bubble 60 ML
$4.95
Syringe for ink line suck out bubble.
Syringe. should have this syringe if you would like save to money. you’ll use this syringe to suck out ink from damper. this can be traditional maintaining for the printer. you furthermore may will use this syringe to suck out ink when ink pump to examine if the ink pump doesn’t work good. Your ink pump is ideal if you’ll suck out ink swimmingly. Otherwise you would like to alter your ink pump. Syringe A pump truly pulls ink through the pinnacle throughout filling and cleansing cycles by making a vacuum between all-time low of the pinnacle and therefore the capping station seal. Failure to stay all-time low of the pinnacle clean and therefore the seal clean and in fitness can limit the power to drag ink through the pinnacle. this could lead to nozzles NOT being cleansed properly.FAQS:How does one recognize your capping station had drawback?If your printhead doesn’t have problem, the foremost chance is that capping high or the full capping station drawback.Because dangerous capping high cannot seal your printhead good and cause false incontrovertible fact that your nozzle was clogged.Its straightforward to check this one.Use syringe to suck out the ink from the tube when ink pump.Must take a look at 2 tubes.If you’ll simply to suck out ink and thats not your capping high or capping station drawback.Otherwise, its capping high or capping station drawback if its to arduous to suck out the ink from the tube when ink pump.mutoh valuejet capping station cap assembly maintenance assy 1204
Advertisement.
Clean Lint-Free Swab 50 PCS
$19.95
Clean Lint-Free Swab 50 PCS
Lint-Free Paper
$0.95
Lint-Free Paper is for cleaning printhead and encoder strip.
Lint Free Cloth Lint Free Cloth for encoder strip clean.
Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak up any excess liquid.Wipe the exposed area of the hp encoder strip gently in one direction, do not try to scrub the strip or bend it. Repeat the cleaning for the back of the hp encoder strip. Using a lint-free cloth moistened with IPA (Isopropyl alcohol), wipe the top of the encoder strip, cleaning the entire length of strip. Use common rubbing alcohol, which is 70% isopropyl alcohol and
Lint-Free Swab Small Size 100 PCS
$4.95
Lint-Free Swab Small Size 100 PCS. It’s for printhead cleaning.
Cleaning Lint-Free Swab 1 PCS
$0.95
Cleaning Lint-Free Swab 1 PCS
Connector
male Female connector for tube OD 9mm/0.35 inch
Connector 4p15
$9.95
9.95USD for 100 PCS
Contact Type Male Pin
Connector Type Header, Shrouded
Number of Positions 4
Number of Positions Loaded All
Pitch 0.059″ (1.50mm)
Number of Rows 1
Contact Mating Length 0.094″ (2.40mm)
Mounting Type Through Hole
Termination Press-Fit
Fastening Type Detent Lock
Contact Finish Tin
Contact Finish Thickness –
Color Natural
Connector UV Ink Tube Fitting Cover
$0.95
Connector UV Ink Tube Fitting Cover
Connector UV Ink Tube Female Fitting I Shape
$0.95
Connector UV Ink Tube Female Fitting I Shape
Connector UV Ink Tube Male Fitting I Shape
$0.95
Connector UV Ink Tube Male Fitting I Shape.
Connector UV Ink Tube Fitting L Shape
$0.95
Connector UV Ink Tube Fitting L Shape.
Connector UV Ink Tube Fitting Y Shape
$0.95
Connector UV Ink Tube Fitting Y Shape. This is for solvent and uv ink tube fitting.
Connector UV Ink Tube Fitting T Shape
$0.95
Connector UV Ink Tube Fitting T Shape. This is for solvent and uv ink resistance tube fitting.
Good to very good resistance to uniform corrosion.
Good to very good resistance to pitting and crevice corrosion.
High resistance to stress corrosion cracking and corrosion fatigue.
High mechanical strength.
Good abrasion and erosion resistance.
Good fatigue resistance.
High energy absorption.
Low thermal expansion.
Good weldability.
Male Connector OD 9mm Water Cooling System
$19.95
Male Connector OD 9mm Water Cooling System
Female Connector OD 9mm Water Cooling System
$19.95
Female Connector OD 9mm for water cooling system
Connector Ink Line Screw ORing
$1.95
Connector Ink Line Screw ORing
O Ring
O Ring for damper uv ink tank reservoir
O Ring for Damper
$0.19
O Ring for Damper ID=2~4mm it’s universal o ring because it’s flexible.
O Ring UV Ink Reservoir Tank
$9.95
O Ring UV Ink Reservoir Tank. This UV ink reservoir O Ring is for all Chinese standard UV ink tank.
Power Supply
Power Supply DC 45V 30V 24V 18V 15V 12V 10A 5V for all printers
Power Supply 5V 10A
$39.95
Power Supply 5V 10A for all printers:
AC Input 110V/220V +-15%.
DC Output 5V 10A.
Power Supply 12V 10A
$39.95
Power Supply 12V 10A
Power Supply 15V 10A
$49.95
Power Supply 15V 10A
Power Supply 18V 10A
$59.95
Power Supply 18V 10A
Power Supply 24V 10A
$79.95
Power Supply 24V 10A
Power Supply 30V 10A
$89.95$69.95
Sale
Power Supply 30V 10A
Power Supply 45v 10a
$99.95$79.95
Sale
Power Supply 45v 10a
Power Supply 48v 10a
$119.95
Power Supply 48v 10a
Spring
Spring Extension Spring Compression Spring.
Encoder Strip Holder Spring All Printers
$29.95
Encoder Strip Holder Spring All Printers
Extension Spring Mutoh Mimaki Roland
$9.95
Extension Spring for Roland VS-300 VS-420 VS-540 VS-640 VS-300i VS-540i VS-640i RA-640 XF-640 and also work for encoder strip holder
Compression Spring Mutoh Valuejet Capping Station
$19.95
Compression Spring Mutoh Valuejet Capping Station
Throttle Valve
Throttle Valve for Mutoh Toucan Ospery Vutek Gandi Gerber Agfa Infinity UV Printers ink line or negative pressure system. This Throttle Valve will control the uv printer negative air pressure output volume first.
Negative Pressure Throttle Valve
$39.95
Throttle Valve for Mutoh Toucan Ospery Vutek Gandi Gerber Agfa Infinity UV Printers ink line or negative pressure system. This Throttle Valve will control the uv printer negative air pressure output volume first.
Tube
Tube Ink Line tubing Ink pUmp Tubing Hard tube Soft tube
Tube Soft Tygon Ink Pump 2ID 4OD
$19.95
Price is one feet and it is perferct for Roland Mimaki Ink pump tube. Soft Tygon Tubing ID=2 OD=4.
Tube Soft Tygon 1ID 3OD 5M
$9.95
This 5m long generic Tygon® tube is appropriate for Mutoh printers with bulk ink system. this is often a high original Tygon tube that corresponds to Mutoh half range FT-115000. This conduit is appropriate for cartridges ME-089019, ME-089017 and ME-089016. it’s associate degree inner diameter of 1mm associate degreed an outer diameter of 3mm.
Mutoh Valuejet 1204. Valuejet 1304. Valuejet 1604. Valuejet 1614. RJ-900C (Drafstation). RJ-901C (Drafstation Pro). RJ-901M (Drafstation Pro). Valuejet 1304W. Valuejet 1604W. Viper 65. Viper 90. Viper Extreme 65. Viper Extreme 90. Viper TX 65. Viper TX 90. Viper TX Extreme 65. Viper TX Extreme 90. Viper TX Soft Sign. Viper 100. Viper TX 100 Extreme. Blizzard 65. Blizzard 90. Spitfire 65. Spitfire 90. Spitfire 100 Extreme.
Tube Soft Negative Pressure 4ID 6OD
$1.95
Clear Tube 4ID 6OD. standard clear tube for negative air pressure.
Tube Hard UV Ink 4ID 6OD
$0.95
Price is 0.95USD/ft. Tube Hard UV Ink 4ID 6OD
Tube Soft UV Ink 3ID 6OD
$4.95
Price is 4.95USD/ft. This Soft UV Ink Tubing ID=3 OD=6 is good for damper, printhead to install. Tubing fits: ID=4 and it also is good for connector because it’s super flexible and ultra chemical resistance.
Tube Soft 2ID 3 OD
$1.95
Price is 0.95USD/ft. It’s for solvent resistance ink tubing.
Tube Hard 25ID 35OD
$0.95
This hard tube ID=2.5 OD=3.5 is for solvent ink resistance tubing.
Tube Hard 2ID 3OD
$0.95
Tube Hard ID=2 OD =3 is ink line tubing and solvent resistance.
Tube Soft 2ID 4 OD
$1.95
This Soft Tube ID=2 OD=4 is perfect for damper, printhead tubing. it is also good for ink line connector.
Roland AJ 1000 Parts
Roland AJ 1000 Parts
Roland AJ-1000 Damper 6085393800
Roland AJ-1000 Damper 6085393800 Replacement Thread outside diameter: 5.52 mm Inside diameter: 2.7 mm Tubing that fits: 2.7 x 1.5 mm nipple: 1.85mm
$4.95
Roland AJ-1000 Limit Sensor 15099115
Roland AJ-1000 Limit Sensor 15099115
$17.95
Roland AJ-1000 IF Network Board
Roland AJ-1000 IF Network Board
$599.95
Roland AJ-1000 Head Board
$199.95
Roland AJ-1000 Carriage Board
$299.95
Roland AJ-1000 Carriage Belt
$99.95
Roland AJ-1000 Super Heating System
Weight: 30 kg/66 lb. When using an unwinding / winding system in combination with slow drying media, applying a lot of ink and/or when printing at high speed, Lavaink Super Powerful dryer will immediately dry your printed media before it is… Read More
$599.95
Roland SJ 1000 Transistor A1746
Roland SJ 1000 Transistor A1746
$11.95
Roland SJ 1000 Transistor C4131
Roland SJ 1000 Transistor C4131
$11.95
Roland SJ 1000 Upgraded Pump Tube
Roland SJ 1000 Upgraded Pump Tube
$7.95
Roland AJ-1000 Refillable Empty Cartridge
Roland AJ-1000 Refillable Empty Cartridge
$11.95
Roland AJ-1000 Cleaning Kit one syringe with tubing and damper. It is good for you to maintain your ink line.
$19.95
Roland AJ-1000 Cleaning Liquid 1000ml
Roland AJ-1000 Cleaning Liquid 1000ml
$59.95
Roland AJ-1000 Main Board
$1799.95
Roland AJ-1000 Media Clamp 21765122
Roland AJ-1000 Media Clamp 21765122
$9.95
Roland AJ-1000 Power Board
$499.95
Roland AJ-1000 Head Cable 23475206
Roland AJ-1000 Head Cable 23475206. they’re 360mm/14″ long. if Mutoh valuejet 1604 head cables get dirty, bent or stripped, you will get printheads which will misfire or finish off altogether – so you’ll need one expensive repair. You hear … Read More
$3.95
Roland AJ-1000 Long Data Cable 3650
Roland AJ-1000 Long Data Cable. they’re 3650mm/143″ long. if Mutoh valuejet 1604 head cables get dirty, bent or stripped, you will get printheads which will misfire or finish off altogether – so you’ll need one expensive repair. You hear t… Read More
$19.95
Roland AJ-1000 Ink Pump Upgraded
Roland AJ-1000 Ink Pump Upgraded
$54.95
Roland AJ-1000 Ink Pump Tygon Tubing
Roland AJ-1000 Ink Pump Tygon Tubing
$69.95
Roland AJ-1000 Ink Pump Motor 22435106
Roland AJ-1000 Ink Pump Motor 22435106. Thi sroland pump motor is compatible to the following printers: Roland AJ-1000. AJ-740. CJ-540. FJ-540. FLJ-300. FP-740. MDX-540A. SC540. SC-545EX. SJ-1000. SJ-1045EX. SJ-540. SJ-640. SJ-645EX. SJ-740… Read More
$29.95
Roland AJ-1000 Rail-BlockItem_Number: SSR15XW1GGE
$69.95
Roland AJ-1000 Encoder Strip 1000000892
Roland AJ-1000 Encoder Strip is used for encoder sensor to position the printhead and so if encoder strip is dirty and encoder sensor can not read encoder strip position correctly. And printing will be Offset. That’s why when your printing … Read More
$99.95
Roland AJ-1000 Encoder Sensor 6700909050
Roland AJ-1000 Encoder Sensor DF-48986 is used to read the encoder strip position and reply to printer to control printhead movement. If your printer gives warning encoder error, and you should check the encoder strip if it was the range wi… Read More
$39.95
Roland AJ-1000 Wiper 11379105. Solvent Resistant Wipers for DX4 printheads – for roland printers. once your wipers square measure dirty or slightly distorted, it is time to switch them. Waste Ink and paper mud accumulate on the wipers. If y… Read More
$1.95
Roland AJ-1000 Scan Motor 7811909010
Roland AJ-1000 Scan Motor 7811909010
$399.95
Roland AJ-1000 Vacuum Fan Assembly 21715110
Roland AJ-1000 Printer Fan
Size: 125 x 125 x 30 mm
This roland printer FJ SJ SP VS fan is for all roland printers: Roland SC 500. Roland SC 540. Roland SC 545. Roland SC 600.Roland CJ 400.Roland CJ 500.Roland CJ 540.Roland CJ 545.Roland FJ … Read More
$49.95
Roland AJ-1000 Printer Fan
Specifications : 40X40X20
Voltage : 24V
Current : 0.06A
This roland printer FJ SJ SP VS fan is for all roland printers: Roland AJ-1000. AJ-1000I. AJ-740. AJ-740I. CJ-540. EGX-360. FJ-540. FP-740. LEC-300. LEC-300A… Read MoreManufacturer: 广泰电机有限公司0512-63327378Phone: 15162520182
$19.95
Roland AJ-1000 45 DEGREE CARBIDE BLADES
This roland sc 545 45 degree carbide blades is for the following Roland Printers: BN-20 CJ-540 CM-12 CM-24 CM-300 CM-400 CM-500 CX-24 CX-300 CX-400 CX-500 FJ-500 FJ-540 FJ-600 FP-740 GX-24 GX-300 GX-400 GX-500 GX-640 LEC-300 LEC-300A LEC-33… Read More
$4.95
Cleaning
Syringe Suck Air Bubble 60 ML
Syringe for ink line suck out bubble.
Syringe. should have this syringe if you would like save to money. you’ll use this syringe to suck out ink from damper. this can be traditional maintaining for the printer. you furthermor… Read More
$4.95
Clean Lint-Free Swab 50 PCS
$19.95
Lint-Free Paper is for cleaning printhead and encoder strip.
Lint Free Cloth Lint Free Cloth for encoder strip clean.
Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak u… Read More
$0.95
Lint-Free Swab Small Size 100 PCS
Lint-Free Swab Small Size 100 PCS. It’s for printhead cleaning.
$4.95
Cleaning Lint-Free Swab 1 PCS
$0.95
Connector
male Female connector for tube OD 9mm/0.35 inch
Connector 4p15
9.95USD for 100 PCS
Contact Type Male Pin
Connector Type Header, Shrouded
Number of Positions 4
Number of Positions Loaded All
Pitch 0.059″ (1.50mm)
Number of Rows 1
Contact Mating Length 0… Read More
$9.95
Connector UV Ink Tube Fitting Cover
Connector UV Ink Tube Fitting Cover
$0.95
Connector UV Ink Tube Female Fitting I Shape
Connector UV Ink Tube Female Fitting I Shape
$0.95
Connector UV Ink Tube Male Fitting I Shape
Connector UV Ink Tube Male Fitting I Shape.
$0.95
Connector UV Ink Tube Fitting L Shape
Connector UV Ink Tube Fitting L Shape.
$0.95
Connector UV Ink Tube Fitting Y Shape
Connector UV Ink Tube Fitting Y Shape. This is for solvent and uv ink tube fitting.
$0.95
Connector UV Ink Tube Fitting T Shape
Connector UV Ink Tube Fitting T Shape. This is for solvent and uv ink resistance tube fitting.
Good to very good resistance to uniform corrosion.
Good to very good resistance to pitting and crevice corrosion.
High resis… Read More
$0.95
Male Connector OD 9mm Water Cooling System
Male Connector OD 9mm Water Cooling System
$19.95
Female Connector OD 9mm Water Cooling System
Female Connector OD 9mm for water cooling system
$19.95
Connector Ink Line Screw ORing
Connector Ink Line Screw ORing
$1.95
O Ring
O Ring for damper uv ink tank reservoir
O Ring for Damper
O Ring for Damper ID=2~4mm it’s universal o ring because it’s flexible.
$0.19
O Ring UV Ink Reservoir Tank. This UV ink reservoir O Ring is for all Chinese standard UV ink tank.
$9.95
Power Supply
Power Supply DC 45V 30V 24V 18V 15V 12V 10A 5V for all printers
Power Supply 5V 10A
Power Supply 5V 10A for all printers:
AC Input 110V/220V +-15%.
DC Output 5V 10A.
$39.95
Power Supply 12V 10A
$39.95
Power Supply 15V 10A
$49.95
Power Supply 18V 10A
$59.95
Power Supply 24V 10A
$79.95
Sale
Power Supply 30V 10A
$89.95$69.95
Sale
Power Supply 45v 10a
$99.95$79.95
Power Supply 48v 10a
$119.95
Spring
Spring Extension Spring Compression Spring.
Encoder Strip Holder Spring All Printers
Encoder Strip Holder Spring All Printers
$29.95
Extension Spring Mutoh Mimaki Roland
Extension Spring for Roland VS-300 VS-420 VS-540 VS-640 VS-300i VS-540i VS-640i RA-640 XF-640 and also work for encoder strip holder
$9.95
Compression Spring Mutoh Valuejet Capping Station
Compression Spring Mutoh Valuejet Capping Station
$19.95
Throttle Valve
Throttle Valve for Mutoh Toucan Ospery Vutek Gandi Gerber Agfa Infinity UV Printers ink line or negative pressure system. This Throttle Valve will control the uv printer negative air pressure output volume first.
Negative Pressure Throttle Valve
Throttle Valve for Mutoh Toucan Ospery Vutek Gandi Gerber Agfa Infinity UV Printers ink line or negative pressure system. This Throttle Valve will control the uv printer negative air pressure output volume first.
$39.95
Tube
Tube Ink Line tubing Ink pUmp Tubing Hard tube Soft tube
Tube Soft Tygon Ink Pump 2ID 4OD
Price is one feet and it is perferct for Roland Mimaki Ink pump tube. Soft Tygon Tubing ID=2 OD=4.
$19.95
This 5m long generic Tygon® tube is appropriate for Mutoh printers with bulk ink system. this is often a high original Tygon tube that corresponds to Mutoh half range FT-115000. This conduit is appropriate for cartridges ME-089019, ME-0… Read More
$9.95
Tube Soft Negative Pressure 4ID 6OD
Clear Tube 4ID 6OD. standard clear tube for negative air pressure.
$1.95
Price is 0.95USD/ft. Tube Hard UV Ink 4ID 6OD
$0.95
Price is 4.95USD/ft. This Soft UV Ink Tubing ID=3 OD=6 is good for damper, printhead to install. Tubing fits: ID=4 and it also is good for connector because it’s super flexible and ultra chemical resistance.
$4.95
Price is 0.95USD/ft. It’s for solvent resistance ink tubing.
$1.95
This hard tube ID=2.5 OD=3.5 is for solvent ink resistance tubing.
$0.95
Tube Hard ID=2 OD =3 is ink line tubing and solvent resistance.
$0.95
This Soft Tube ID=2 OD=4 is perfect for damper, printhead tubing. it is also good for ink line connector.
$1.95
Roland AJ 1000 Parts
Roland AJ 1000 Parts Printhead Damper Ink Pump Encoder Rail Block Belt
Roland AJ 1000 Parts CR Belt Encoder Strip Encoder Sensor Tube Head Cable Data Cable Ink Pump Rail Block Fan Scan Motor Transistor Fan