Description
JV33 Damper
O-Ring for JV33 Damper
Universal O ring for solvent resistance Price: $0.25 USD
JV33 Damper Connector
Mimaki JV33 Damper Connector Price: $5.95 USD
JV33 Damper
JV33 Damper for Mimaki JV33 printers. Dampers are solvent resistant. the flow of ink will be clogged if dampers were dirty and your mimaki JV33 head will get frequent drop-outs, missing jets and ink starvation. And your printing will failed with banding due to head clogged. The worst thing is that your mimaki head will burn because of overheated jets.
You need to change your dampers if Ink is not supplied to the head properly. As a result, the white or dark lines appear in the printing image, or printing becomes scratchy. Our Mimaki CJV30 Dampers are solvent resistant.
You should remove air from your dampers after replacing JV33 CJV30 Damper. therefore you need to check damper o-ring that must be install all dampers with o-ring to seal ink line perfectly. Lavaink have all ink line solution to delivery ink line perfect seal condition. Buy more parts at www.Lavaink.com
JV33 Damper
Damper Sealed Perfect is the key for ink line. You can test this by using a syringe to suck out air or ink from damper, if you can suck ink out easily and that can prove your ink line including damper sealing is perfect. otherwise you should double check where is loosed ink your installation for damper.
To insure ink line sealed perfectly, you must use o-ring for all dampers installation. Lavaink sell universal o-ring for your damper seal perfect at Universal O ring
CJV30 Damper. Damper. JV33 Damper. Damper.
Mimaki JV33-BS.Mimaki JV33-260.Mimaki JV33-160.Mimaki JV33-130.Mimaki CJV30BS-160.Mimaki CJV30BS-130.Mimaki CJV30BS-100.Mimaki CJV30BS-60.Mimaki CJV30-160.Mimaki CJV30-130.Mimaki CJV30-100.Mimaki CJV30-60.
Lavaink Universal O-ring is for all dampers from ID =2 to ID =4 and can keep seal perfectly.
Syringe can be your good help to check whether your ink line is sealed perfect or not. If ink line is clogged, you must use syringe to push ink from ink cartridge to damper to head. automatically cleaning doesn’t work if there was too much air in the ink line.
