Description
This Canon iPF8400SE Encoder Strip is for Canon iPF8400SE media width is 44 inch Large Format Printer.Lavaink provides you not only Canon iPF8400SE Encoder Strip but also Canon iPF8400SE Encoder Sensor. We stock Canon iPF8400SE Encoder Strip and encoder sensor. Overnight shipment is available when you check out in shopping cart. How to clean Canon iPF8400SE Encoder Strip? You should change your Canon iPF8400SE Encoder Strip if your printer can not print a Straight line perfectly, like Line dislocation or deflection. You will need Isopropyl Alcohol, Cleaning Swabs and Paper Towels. Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak up any excess liquid. Wipe the exposed area of the Canon iPF8400SE Encoder Strip gently in one direction, do not try to scrub the Canon iPF8400SE Encoder Strip. Repeat the cleaning for the back of the Canon iPF8400SE Encoder Strip. Put the machine into Cleaning Mode under the Maintenance Sub-Menu. You will now be asked to remove the maintenance cover on the left side of the printer. After the Head Carriage moves to the left side of the printer, continue to clean the area of the Canon iPF8400SE Encoder Strip that is now exposed over the docking area. Once the Canon iPF8400SE Encoder Strip has been cleaned, perform a Limit Initialization to reset the Head Carriage. All printer manufacturers use optical Canon iPF8400SE Encoder Strips in inkjet printers to tell the print head carrier how for it has moved and also when it return to home position. If you get a bad printer jam hat blocks the carrier this Canon iPF8400SE Encoder Strip can get disconnected and then the printer can not print anything. We are about to show you how to repair the strip if it is damaged and reinstall it so the printer can function again. This guide uses the Roalnd Printer as an example but the steps are the same for any printer that uses these Canon iPF8400SE Encoder Strips. How to replace Canon iPF8400SE Encoder Sensor at https://lavaink.com/encoder/replace-encoder-sensor/
