Description
This Canon PRO-2000 Encoder Strip is for Canon PRO-2000 media width is 24 inch Large Format Printer.Lavaink provides you not only Canon PRO-2000 Encoder Strip but also Canon PRO-2000 Encoder Sensor. We stock Canon PRO-2000 Encoder Strip and encoder sensor. Overnight shipment is available when you check out in shopping cart. How to clean Canon PRO-2000 Encoder Strip? You should change your Canon PRO-2000 Encoder Strip if your printer can not print a Straight line perfectly, like Line dislocation or deflection. You will need Isopropyl Alcohol, Cleaning Swabs and Paper Towels. Putting two drops of alcohol onto each side of the cleaning swab. Dab the swab on the paper towel to soak up any excess liquid. Wipe the exposed area of the Canon PRO-2000 Encoder Strip gently in one direction, do not try to scrub the Canon PRO-2000 Encoder Strip. Repeat the cleaning for the back of the Canon PRO-2000 Encoder Strip. Put the machine into Cleaning Mode under the Maintenance Sub-Menu. You will now be asked to remove the maintenance cover on the left side of the printer. After the Head Carriage moves to the left side of the printer, continue to clean the area of the Canon PRO-2000 Encoder Strip that is now exposed over the docking area. Once the Canon PRO-2000 Encoder Strip has been cleaned, perform a Limit Initialization to reset the Head Carriage. All printer manufacturers use optical Canon PRO-2000 Encoder Strips in inkjet printers to tell the print head carrier how for it has moved and also when it return to home position. If you get a bad printer jam hat blocks the carrier this Canon PRO-2000 Encoder Strip can get disconnected and then the printer can not print anything. We are about to show you how to repair the strip if it is damaged and reinstall it so the printer can function again. This guide uses the Roalnd Printer as an example but the steps are the same for any printer that uses these Canon PRO-2000 Encoder Strips. How to replace Canon PRO-2000 Encoder Sensor at https://lavaink.com/encoder/replace-encoder-sensor/